| Application: | DC Gear Motor |
|---|---|
| Operating Speed: | Low Speed |
| Excitation Mode: | Excited |
| Function: | Driving |
| Casing Protection: | Open Type |
| Number of Poles: | 2 |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier High Power version with 5A stall current:5A
With 64CPR encoder or not 64CPR ;
With back shaft or not.
With metal brush or carbon brush.
37mm gearbox motor, low noise and small load torque selection POM material plastic gear, there is no requirement for noise, but the choice of large load torque metal gear,
The motor is used in robots, toys, 3D printers, smart devices, kitchen supplies and other products.
The encoder can be used as a low cost servo motor and has the same function.
Equipped with a chip gearbox can reduce the clearance of the gear operation and reduce the swing.
Various parameters can be adjusted according to customer requirements, the maximum torque of 12V/24V has a maximum of 5N.m, for the speed of 10~3000RPM
| Model | Voltage Unit: VDC |
No load speed Unit: rpm |
Noload current Unit: mA |
Stall torque Unit: kg.cm |
Gear ratio |
| 37D306-EN | 12V | 1760 rpm | 250mA | 3.9 kg.cm | 6.25:1 |
| 37D3010-EN | 12V | 1100 rpm | 250mA | 5.5 kg.cm | 10:1 |
| 37D3019-EN | 12V | 585 rpm | 250mA | 9 kg.cm | 18.75:1 |
| 37D3030-EN | 12V | 365 rpm | 250mA | 15 kg.cm | 30:1 |
| 37D3050-EN | 12V | 220 rpm | 250mA | 21 kg.cm | 50:1 |
| 37D3070-EN | 12V | 157 rpm | 250mA | 31 kg.cm | 70:1 |
| 37D30100-EN | 12V | 107 rpm | 250mA | 45 kg.cm | 102:1 |
| 37D30131-EN | 12V | 83 rpm | 250mA | 55 kg.cm | 131.25:1 |
| 37D30168-EN | 12V | 65 rpm | 250mA | 70 kg.cm | 168.75:1 |
| 37D30270-EN | 12V | 40 rpm | 250mA | 70 kg.cm | 270:1 |
| 37D30506-EN | 12V | 21 rpm | 250mA | 70 kg.cm | 506.25:1 |
| 37D30810-EN | 12V | 13 rpm | 250mA | 70 kg.cm | 810:1 |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}